Прошу помочь!
имею сетевые карты
target nc375t 4x1Gb 192.168.77.62 -65
initiator nc364t 192.168.77.23 - 26
Задача - настроить цель в режиме multipath
/etc/tgt/conf.d/target.conf
<target iqn.2022-02.x99tf:target>
backing-store /xfs/lun.img
initiator-address 192.168.77.23
initiator-address 192.168.77.24
initiator-address 192.168.77.25
initiator-address 192.168.77.26
</target>
проверяем
:~# tgtadm --mode target --op show
Target 1: iqn.2022-02.x99tf:target
System information:
Driver: iscsi
State: ready
I_T nexus information:
LUN information:
LUN: 0
Type: controller
SCSI ID: IET 00010000
SCSI SN: beaf10
Size: 0 MB, Block size: 1
Online: Yes
Removable media: No
Prevent removal: No
Readonly: No
SWP: No
Thin-provisioning: No
Backing store type: null
Backing store path: None
Backing store flags:
LUN: 1
Type: disk
SCSI ID: IET 00010001
SCSI SN: beaf11
Size: 375810 MB, Block size: 512
Online: Yes
Removable media: No
Prevent removal: No
Readonly: No
SWP: No
Thin-provisioning: No
Backing store type: rdwr
Backing store path: /xfs/lun.img
Backing store flags:
Account information:
ACL information:
192.168.77.23
192.168.77.24
192.168.77.25
192.168.77.26
проверяю цели на иннициаторе
:~# iscsiadm -m discovery -t sendtargets -p 192.168.77.62
должно выдать 4 шт
а выдает 1шт цель
Как включить multipath ?